For discrete dosage and continuous delivery

The controller S-F10 is recom­mended for high requirements in control of discrete dosage and continuous delivery tasks in combination with mzr-pumps mzr-7208, mzr-7208X1, mzr-11508 and mzr-11558. The microcontroller allows speed and position control for highly accurate dosage. The compact design offers flexible installation. Process control link can be established via a RS-232, CANopen or EtherCAT interface. Motor speed or flow rate can be set either by analog inputs (± 10 V). Programs for dosage control can be saved in the memory.


  • Pump controller for discrete dosage
    and continuous delivery
  • 4-Q-DC servo amplifier in compact housing
  • Digital encoder regulator
  • 2 analog inputs ± 10 V
  • 3 digital inputs, opto-decoupled
  • 2 digital outputs
  • LED status indicator
  • Cable set for mzr-pumps
  • EEPROM memory
  • Interface USB/RS-232, USB/CANopen, USB/RS-232/EtherCAT



Software mzr-pump controller S-F10 by Faulhaber Motion Manager 6

All motor parameters for pump control can be set and saved with the software »Motion Manager 6« operating under Windows®. The program language is IEC-based. Dosage programs can easily be typed on a computer and transferred to the EEPROM.Several sample programs are supplied such as the triggering of different dosage programs with the internal digital inputs.

Technical data

  • Control
    PI-controller, speed and position control
  • Supply voltage
    48 V DC (0 – 50 V)
  • Backup supply voltage for logic
    24 (12 – 50 V) V DC
  • Max. power output
    480 W
  • Max. continuous output current
    10 A
  • Max. peak output current
    30 A (< 3 s)
  • Speed adjustment
    1 – 6000 rpm
  • Voltage
    terminal screw, 2 pole (Motor)
    terminal screw, 2 pole (Controller)
  • Pump connector
    terminal screw 3-pols, Connector Hall sensors 5-pols, connector Encoder 8-pols
  • Analog inputs for motor speed
    2, voltage signal ± 10 V
  • Digital inputs
    3, TTL bzw. PLC
  • Digital outputs
    2, max. UL / 0,7 A
  • Interface
    USB / RS-232, CANopen, EtherCAT
  • Program memory
    8 customized programs
  • Operating temperature range
    -40 … +85 °C (32 … 104 °F)
  • Protection class
    IP 20
  • Mounting
    along the side or along the back
  • Dimensions (L x W x H)
    approx. 115 x 75 x 26 (44) mm
  • Weight
    approx. 230 (270) g
  • Notice
    Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice. 
    This document is subject to change without notice.

Show more


 Back to list